COMPLETE JK DRAG LINK KIT
Details
- Heavy Duty Drag Link Kit
- Trail Tested
- Uses patented FAB SERIES® replaceable cartridge system
NOTE: CLEARANCE WARNING FOR HIGH STEER POSITION. Using the drag link in the high steer position requires 17" or larger aftermarket wheels with 4.75" backspacing or less to clear the drag link forging at the wheel. The vehicle must have a minimum of a 3" suspension lift so the drag link sleeve will not rub the frame.
SEE ALL FAB SERIES PARTS
Specifications
| Attribute | Description |
|---|---|
| Tie Rod Assembly Length | Adjustable |
| Tie Rod Thread | 1 1/4-12 |
| Stud Thread | 9/16-18 |
| Small Dia. Taper 1 | 0.658 |
| Large Dia. Taper 1 | 0.736 |
| Small Dia. Taper 2 | - |
| Large Dia. Taper 2 | - |
| Stud Length | 0.661 |
| Tie Rod End Gender | Male |
| Tie Rod Sleeve Length | 22.375 |
| Tie Rod Sleeve Inside Dia. | 1 1/4-12 |
| Adjustable Y/N | Yes |
| Grease Fitting Included | Yes |
| Bushings Included | No |
| Package Content | 1 Sleeve, 2 Rod Ends, 2 Cartridges, 2 Dust Boots, 2 Lock Nuts, 2 Grease Fittings, 2 Belleville Washers, 2 Jam Nuts |
Applications
| Year | Make | Model | Location |
|---|---|---|---|
| 2007 | Jeep | Wrangler |
|
| 2008 | Jeep | Wrangler |
|
| 2009 | Jeep | Wrangler |
|
| 2010 | Jeep | Wrangler |
|
| 2011 | Jeep | Wrangler |
|
| 2012 | Jeep | Wrangler |
|
| 2013 | Jeep | Wrangler |
|
| 2014 | Jeep | Wrangler |
|
| 2015 | Jeep | Wrangler |
|
| 2016 | Jeep | Wrangler |
|
| 2017 | Jeep | Wrangler |
|
| 2018 | Jeep | Wrangler |
|
Ratings & Reviews
1 review
Real HD and top quality ...but doesent fit whit some Hight Steer kits and Rims
by Headman
At first - this Draglink is super heavy and realy HD! Perfect quality. But - when you drive a highsteer kit (mine is from AEV 4,5" Lift) and the Link is on the top of the knuckle -it can give trouble with the inside of the Rim. I got drive a 8,5x17 ET10mm Wheel and it doesent fit -the Joint hits the Wheel/Rim. Wheelspacers or an other Wheel/Backspace will help, but here in Germany is that not possible bey law :-(