DUAL LOAD CARRYING BALL JOINT KIT
Fits: Jeep JK** / WJ*
*NOTE: WILL NOT FIT G2 AXLES.
*NOTE: 2017 Jeep Rubicon's may have a clearance issue between the axle shaft yoke and the top of the lower ball joint housing. The solution is to lightly grind the axle shaft yoke to allow for clearance between the yoke and the top of the lower ball joint housing.
- -Dual Load Carrying Ball Joints
- -Revolutionary Dual Load Carrying Ball Joint System
- -Load-Carrying Upper Ball Joint balances load on Entire Steering System
- -Tapered Stud Roller Bearing
- -LM76 PTFE-Lined Fiberglass Epoxy Internal Bearing
- -Lower Ball Joint includes Replaceable Low-Profile Dust Boot
- -32mm Load Carrying Powdered Metal Bearing in Lower Ball Joint
- -Hexad Stud Grease Delivery System
- -Fully-Greaseable Ball Joint Housings
Upper and Lower Ball Joints are Made in USA.
|Stud Thread Size||5/8-18, 9/16-18|
|Small Dia. of Stud Taper||0.698, 0.632|
|Stud Taper Per Ft.||2.0 in/ft|
|Ball Joint Attachment Type||Press In|
|Number of Bolts||-|
|Thread in Diameter||-, 1.75-12|
|Press in Diameter||1.633, 1.791|
|Package Contents||2 Ball Joints, 2 Load Carrying Upper Ball Joints with Grease Seals, 2 Dust Boots, 4 Castle Nuts, 4 Cotter Pins, 2 Retaining Nuts, 1 Adjusting Wrench, 2 Set Screws, 4 Grease Fittings|
Ratings & Reviews
by Chris Herrmann
THIS COMPANY HAS AWESOME CUSTOMER SERVICE!!!! Fast shipping, extremely knowledgeable staff. Ball Joints are SOLID, very well built with quality materials. These ball joints instantly fixed the vibrations in the wheel, and very easy install! I will be recommending these to all my jeep buddies, and will be proudly showing them off. I'm extremely impressed with Rare Parts! Thank you guys.