ALUM. DUAL MOUNT STEERING CLAMP (FITS 1.75OD)

DUAL MOUNT STEERING CLAMP

• FITS 1.75 INCH STEERING SLEEVES
• COMPATIBLE WITH OUR FAB SERIES® STEERING SYSTEM
• THREADED FOR STEERING STABILIZERS OR RAM ASSIST CYLINDERS
• Pre-Tapped For 1/2”-20 Steering Stabilizer
• Pre-Tapped For 5/8”-18 Ram Assist Cylinders
• REVERSIBLE FOR ORIENTATION
• INCLUDES SIDE-BITERS TO ELIMINATE SLIPPING

TECH NOTES:

• Use Red Loctite 262 on ALL Fasteners
• 6 x Cap Bolts (1/4" x 20tpi. x 1-9/16" long). 3/16" Hex (16 ft-lbs) Included
• 3 x Side Biters / Coned Set Screws (5/16" x 18tpi. x 1/2" long). 5/32" Hex (13 ft-lbs) Included
• Steering Stabilizer Bolt 3/4" Socket (90-ft-lbs) Not Included
• Fox ATS Bolt (TMR) 3/8" Hex (75 ft-lbs) Not Included
• Ram Assist Bolt 15/16" Socket (135 ft-lbs) Not Inlcuded