DIAMOND SERIES PITMAN ARM
Details
1 Each, 1 Per Vehicle.
For 1959-1960 Cadillacs, the pitman arms were under-designed, and a recall was eventually issued in 1978. We have the solution you are looking for - our Diamond Series pitman arm has a wider cross section to eliminate the braking point. Our design also features a replaceable ball stud - when the wearable component eventually wears out, it is much easier to replace the ball stud.
- Increased forging size
- Greaseable
- Heat treated components and forging
- Precision machining tolerances
Specifications
| Attribute | Description |
|---|---|
| Stud Dia. Small End Of Taper | Ball Dia. 0.872 |
| Sector Shaft Dia. | 1.250 |
| Sector Shaft Spline Large Inner Dia. | 1.157 |
| Length Center to Center | 6.375 |
| Key Way (Male or Female) | Male |
| Off Set | Straight |
| # of Splines | 32 |
| Greaseable | No |
| Hardware Content Included | No |
| Arm Type | Straight |
| Arm Fixture | Ball |
| Arm Fixture Stud Thread/Hole Inside Dia. | - |
| Package Contents | 1 Pitman Arm |
Applications
| Year | Make | Model | Location |
|---|---|---|---|
| 1959 | Cadillac | Commercial Chassis |
|
| 1960 | Cadillac | Commercial Chassis |
|
| 1959 | Cadillac | DeVille |
|
| 1960 | Cadillac | DeVille |
|
| 1959 | Cadillac | Eldorado |
|
| 1960 | Cadillac | Eldorado |
|
| 1959 | Cadillac | Series 60 Fleetwood |
|
| 1960 | Cadillac | Series 60 Fleetwood |
|
| 1959 | Cadillac | Series 62 |
|
| 1960 | Cadillac | Series 62 |
|
| 1959 | Cadillac | Series 75 Fleetwood |
|
| 1960 | Cadillac | Series 75 Fleetwood |
|