Bracket Holes # | 1.000 |
Length (in) Ctr. to Ctr. | 1.000 |
Thread Size | 6.603 |
Hardware Included | Female |
Ball Design | Down |
Arm Type | 32 |
Arm Fixture | No |
Bracket Fixture | No |
Arm Fixture Stud Thread/Hole Inside Dia. | Bent |
Bracket Fixture Stud Thread/Hole Inside Dia. | Hole |
Stud Dia. Small End Of Taper | 0.549 |
Sector Shaft Dia. | 1.000 |
Sector Shaft Spline Large Inner Dia. | 0.985 |
Length Center to Center | 6.125 |
Key Way (Male or Female) | Female |
Off Set | Down |
# of Splines | 32 |
Greaseable | No |
Hardware Content Included | No |
Arm Type | Bent |
Arm Fixture | Hole |
Arm Fixture Stud Thread/Hole Inside Dia | 0.544 |
Package Content | 1 Pitman Arm, 1 Idler Arm with Bushing, 1 Dust Boot, 1 Castle Nut, 1 Cotter Pin |